We all love our cozy and fluffy carpets, and it is challenging to keep them clean all the time. Especially in high traffic areas, carpets collect bacteria, insects, pet hair, dust mites, and pet urine. The addition of spilled dirt, water, ink, or oil further worsens the situation.
As all this nasty stuff can be a health risk for your loved ones, you may decide to do carpet cleaning on your own and wonder where to start. Figuring out how to sanitize your carpet is a time-consuming task, and if you don’t have a steam cleaner, it can be more daunting. You may think of buying a steam cleaner that can be pricier for you.
Thankfully, you can do carpet cleaning, sanitize and remove all the stains without a steam cleaner at your home. Today, we will share an easy-to-follow and budget-friendly method to keep your carpet clean and disinfected. The only machine you will need is your old vacuum and some stuff that will already be resting in your pantry. So, let’s learn the easiest way to sanitize the carpet:
Things Required Cleaning the Carpet
Before you go for carpet cleaning, gather all these products:
- A Rag
- Water
- Bucket
- A scrub brush
- White vinegar
- Liquid dish soap
- Soft bristle broom or a vacuum
Step 1: Remove the Furniture and Vacuum the Dust
If there is any furniture lying on the carpet, remove it first to disinfect the carpet properly. After removing furniture, you need to remove dirt and debris from the carpet. You can either use a vacuum or a broom. It’s better to have a vacuum because it cleans pet hair, dust, and other debris.
If you don’t have a vacuum, use a soft-bristle broom and a dustpan. If the broom is flimsy and you want to make it firmly bound, bound it with a rubber band.
For a carpet with thick fibers and a high pile, you need to be very patient while removing any dust and dirt. However, if it has a low pile, cleaning with a broom will be easy.
Step 2: Make a Disinfecting Solvent
This step is super easy. Bring a bucket, and half fill it with white vinegar and half with cold water. Add some soap dish detergent and mix all things thoroughly. You can use a stick to mix the content. Finally, it will become foamy.
Step 3: Check the Prepared Solution
Since the disinfecting solution contains vinegar, it works amazingly on most carpet fibers and cleans stains thoroughly. However, it can affect the color of your carpet. Therefore, it’s better to check the disinfectant before applying it to the whole carpet. Pick a corner of the carpet or any hidden spot and pour some drops of solution on it. Wait to see the results. If it doesn’t decolorize the carpet, you can use it.
Step 4: Apply the Solution
Bring a soft bristle brush that you use for any purpose. Make sure that bristles are soft enough not to destroy the carpet fibers.
Immerse the brush in the vinegar solution and scrub it over the dust or stain area. While scrubbing the stain, don’t use too much pressure to destroy the fibers. Instead of being aggressive, keep the pressure low and softly clean the carpet. While you slowly scrub the carpet, dust and stains would be removed from the depth.
Also, don’t start scrubbing all the carpet at once. Divide it into sections to scrub the stains off. When you are done, leave the carpet in this position. Keep it this way for 10-15 minutes. This way, disinfectant will penetrate deeper and disinfect the carpet properly.
Step 5: Clean the Carpet
After scrubbing the carpet with a vinegar solution, it’s time to rinse the carpet. Take another bucket of cold water and dip the microfiber rag in water. Now start rubbing the carpet fibers. This will remove any bacteria, dust, debris, or stains stuck in carpet fibers. Keep on rinsing and rubbing the carpet until the water gets clear. Just as you scrub the whole carpet in sections, do this process in sections.
Step 6: Dry the Carpet
Once you have done the difficult task, it’s time to dry the carpet. Choosing a sunny day to wash and dry the carpet is always ideal. If you do this on a cold or rainy day, the carpet will not dry faster. The humidity in the atmosphere will not let the rug dry quickly. Moreover, never try to dry the rug under direct sunlight or in front of any heat directly.
Turn on the fan in the room, open windows and doors, and let the carpet dry naturally.
Step 7: Vacuum the Carpet
In the end, vacuum the carpet again. This final step is needed to remove any remaining debris adhering to the carpet. This also helps remove all residual mixtures seeped in the carpet fibers.
After cleaning with vinegar solution and water, the carpet pile also gets damp. Vacuuming brings it back to fluffier form. You can also use a comb to bring the fibers’ fluffiness back.
Get Professional Carpet Cleaning Service in Clarksville TN
The above-mentioned procedure of sanitizing carpet at home needs your effort and time. What if you don’t have enough time to do this task?
In such a situation, the best way is to hire a trustworthy and reputable carpet cleaning service. If you are in Clarksville TN, or nearby, we suggest you call A Action Steamer Carpet Cleaning.
A Action Steamers are well-known professionals for their carpet cleaning services in Clarksville, TN, for over 35 years. They have all the necessary high-quality equipment required for carpet cleaning. No matter what mess has been made on your carpet, they are professional at dealing with it. Their eco-friendly choices, world-class customer service, experienced team, and low costs make them ideal for carpet cleaning services.
So, if you are hunting for a good carpet cleaning service, call A Action steamer or visit their website and get professional treatment for your dirty carpets.